46
Vichy Shower
NB! The Vichy shower should only be
taken on the vibrating bed!
NB! Do not fill the bath with water
when the Vichy Shower operates from
the water supply!
Place the vibrating bed onto the bath tub
and plug in the power cord into the backside
of the equipment.
NB! Infrared sauna and Vichy shower
functions cannot work at the same time.
Before activating Vichy shower function
check the water temperature set on the
thermostat.
WARNING!
Vichy shower water temperature is the
temperature set on the thermostat.
Water temperature can be adjusted in
accordance with the wishes of the client
and the purpose of the ongoing
treatment.
After the warm-up cycle the cocoon’s hood
can be opened and the client can lie down
onto the vibrating table. The cocoon hood
should be closed slowly and carefully.
Place a special piece of cloth onto the
opened area near the client’s head. The
Neck Cloth will prevent excessive steam
escaping from the cocoon during treatment.
Neck Cloth is available in NeoQi® supporting
products range.
To activate Vichy shower function, press the
VICHY SHOWER button on the Control
Panel A.
Vichy shower will appear on the screen
surrounded by a circle. (Water will start to
flow from Vichy jets).
There are 3 speeds for Vichy shower:
1. Slowly changing water pattern for
rehabilitation purpose
2. Medium speed
3. Fast change of water pattern,
especially suitable for washing off
cosmetic product (such as body
scrub, body wrap etc.)
To select desirable Vichy shower speed,
press the +/- buttons on control panel A,
while Vichy shower indicator is surrounded
by a circle. The display will show the speed
selection.
It is possible to regulate the Vichy shower
throughout the session. For that you must
hold finger for at least 2 seconds on the
VICHY SHOWER button, the Vichy shower
indicator will be surrounded by a circle and
you can adjust the speed by pressing +/-
buttons. To change the area you want to
massage with Vichy, adjust the Vichy jets’
position manually.
To turn OFF the function, press VICHY
SHOWER button.
To Next Page
Loading...