Citiz service manual
33
OPERATION
5.4.2 Resetting the fill up level
With the following procedure all programmed fill up levels will be set back to this factory
settings:
Coffee button "Espresso" ....................................................................................... 40 ml
Coffee button "Lungo" ...........................................................................................110 ml
1) With machine being turned off, press
and hold down the lungo button for
5 seconds.
2) LEDs will blink fast 3 times to confirm
machine has been reset to factory set-
tings.
3) LEDs will then continue to blink nor-
mally, as heating up, until ready.
Steady lights: machine ready
Factory settings:
Espresso cup ...................................40 ml
Lungo cup......................................110 ml
Power Off mode...............................9 min
3x