EasyManua.ls Logo

Nespresso Lattissima+ F416BL - Malfunzionamenti

Nespresso Lattissima+ F416BL
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
Release 00 - 07.2011
Ricerca guasti
3.2. Malfunzionamenti
INCONVENIENTE CAUSA RIMEDIO
Temperatura del caffè troppo bassa
Incrostazioni sulla macchina
Eseguire la decalcicazione
Sostituire la sonda NTC
Termoblocco difettoso Sostituire il termoblocco
Temperatura del caffè troppo alta
Sensore di temperatura non ssato Fissare il sensore di temperatura
Difetti del pannello elettronico Sostituire il pannello elettronico
La pompa è rumorosa
Il contenitore dell’acqua è vuoto Riempire il contenitore dell’acqua
Il contenitore dell’acqua non è inserito
correttamente
Inserire correttamente il contenitore
dell’acqua
Il usso non è regolare o è inesisten-
te
Il contenitore dell’acqua è vuoto Riempire il contenitore dell’acqua
Il contenitore dell’acqua non è inserito
correttamente
Inserire correttamente il contenitore
dell’acqua
Incrostazioni sul beccuccio di erogazione
Pulire, decalcicare o sostituire il beccuccio
Incrostazioni sulla macchina Eseguire la decalcicazione
Pompa difettosa Sostituire la pompa
Pannello elettronico guasto Sostituire il pannello elettronico
Fuoriuscita di acqua anziché di caf-
fè, capsula non perforata
Leva non perfettamente chiusa
Vericare e chiudere correttamente la
leva
Il contenitore di raccolta capsule usate
potrebbe essere piena
Svuotare il contenitore capsule usate
La leva non si chiude completamen-
te
Il contenitore di raccolta capsule usate
potrebbe essere piena
Svuotare il contenitore capsule usate
La capsula non viene espulsa
Blocco espulsione capsule difettoso Sostituire il blocco espulsione capsule
Portacapsula sporco Pulire o sostituire il portacapsula
Troubleshooting
3.2. Malfunctioning
PROBLEM CAUSE SOLUTION
Coffee temperature too low
Deposits on the machine
Perform descaling
Replace the NTC
Faulty thermoblock Replace the thermoblock
Coffee temperature too high
Temperature sensor not attached Attach the temperature sensor
Electronic panel faults Replace the power board
The pump is noisy
The water container is empty Fill the water container
The water container is not inserted
properly
Insert the water container properly
The ow is not regular or non-
existent
The water container is empty Fill the water container
The water container is not inserted
properly
Insert the water container properly
Deposits on the dispensing nozzle Clean, descale or replace the nozzle
Deposits on the machine Perform descaling
Faulty pump Replace the pump
Faulty electronic panel Replace the power board
Water comes out instead of coffee,
capsule not perforated
Lever is not fully closed
Check the lever and close it properly
The used capsule container may be full
Empty the used capsule container
The lever does not close completely The used capsule container may be full Empty the used capsule container
The capsule is not ejected
Faulty capsule ejection block Replace the capsule ejection block
Dirty capsule container Clean or replace the capsule container

Table of Contents

Related product manuals