VIRDI AC 1000 User Guide 39
UNION COMMUNITY CO.,LTd.
3Fl. Hyundai Topics Bldg, 44-3 Bangi-dong, Songpa-gu, Seoul, Korea 138-050,
Tel: 82-2-6488-3000, Fax: 82-2-6488-3099, E-Mail:sales@unioncomm.co.kr,
3.8.1.2. Language settings
[ENT] ◆ Æ [6] Æ ‘084265’ + [ENT] Æ [5] Æ [ENT] ◆
< Language >:1
0=KOR 1=ENG
2=JPN 3=CHN
4=SPN 5=UAE
6=ITLY 7=VIET
8=OTH
Default setting: ‘1’ (English)
Voice information languages follow these settings: ‘0’: Korean, ‘1’: English, ‘2’:
Japanese, ‘3’: Spanish, ‘4’: Chinese, ‘5’: Arabic, ‘6’:Italian, ‘7’:Vietnam
‘8’: Other language.
‘0’, ‘1’, ‘2’, ‘4’: LCD characters also correspond to the language.
‘3’, ‘5’, ‘6’, ’7’, ‘8’ : LCD characters are in English.
Once the setting is complete, press [ENT] to move to the upper menu
3.8.2. Function key settings
◆ [Ent-] Æ [6] Æ “084265” [Ent] Æ [2] ◆
<Key On/Off>
1=F1:O 2=F2:O
3=F3:O 4=F4:O
5=Ent:O
Default setting: all ‘O’
This is for enabling/disabling the function keys. ‘O’ is ‘enable’ and ‘X’ is ‘disable’.
Whenever a function key is pressed, it toggles between O/X.
1 is for [F1], 2 is for [F2], 3 is for [F3], 4 is for [F4], and 5 is for [Ent]. If F1
becomes X by pressing [1], you can not change to start mode even if you press
[F1].
Additionally, if only [F1] or [F2] is set to ‘O’, the terminal can be used in either
always start or always leave mode.
Once the setting is complete, press [ENT] to move to the upper menu.
To Next Page
Loading...
