VIRDI AC 1000 User Guide 40
UNION COMMUNITY CO.,LTd.
3Fl. Hyundai Topics Bldg, 44-3 Bangi-dong, Songpa-gu, Seoul, Korea 138-050,
Tel: 82-2-6488-3000, Fax: 82-2-6488-3099, E-Mail:sales@unioncomm.co.kr,
3.8.3. Card reader settings
◆ [Ent-] Æ [6] Æ “084265” [Ent] Æ [3] ◆
<Card Reade>:0
0=RF/SC
1=Wiegand
Default setting: ‘0’
This is the setting for the card reader connected to a terminal. This shall be set
to 0 except in the following cases:.
- ‘0’: 125KHz card or 13.56MHz card
- ‘1’: Additional card reader is connected through wiegand interface.
(EX: HID reader)
If it is set to the default setting ‘0’, it is possible to set <Card Format> to change
card number display format.
<Card Format >:0
0=Hexa 8byte
1=Hexa 16byte
2=Decimal
Default setting: ‘0’
‘0’: Displayed 8 digit number of 16 antilogarithm Æ A5CBEF12
‘1’: Displayed 8 digit added behind of 8 digit number of 16 antilogarithm
Æ A5CBEF1200000000
‘2’: Displayed 10 digit number of 10 antilogarithm Æ 0317705125
Once the setting is complete, press [ENT] to move to the upper menu.
To Next Page
Loading...
