Ness D8X User Manual

26
Programming - How to enter Program Mode
In User Program Mode you can
program User Codes, Timers, Real
Time Clock, Follow Me Telephone
Number.
USER CODES
The panel has 56 user codes which
can be operated by keypad code
(3-6 digit PIN), by optional radio
key or by optional access cards.
The factory default Master Code
is 123. You should re-program
this code with a new code of your
own choice.
TIMERS
You can also re-program the Entry
Delay Time and Exit Delay Time if
you need more or less time to exit
and enter the premises.
REAL TIME CLOCK
Some automation features such as
AutoTime rely on the onboard Real
Time Clock. Set the current date
and time to ensure events take
place as expected.
You will need to adjust the Hours
setting when Daylight Savings
starts and ends.
FOLLOW ME TELEPHONE NUM-
BER
If your panel is set up for Audible
Voice monitoring, you can program
the Follow Me Telephone Number
to temporarily replace the two
installer-programmed phone
numbers.
Enter program mode when the panel is in the
normal disarmed mode.
To enter User Program Mode.
Touch
+ +
Your Master code.
To exit User Program Mode.
Touch
+
The panel will automatically exit Program Mode
if the keypad is inactive for 4 minutes.

Ness D8X Specifications

General

Brand	Ness
Model	D8X
Category	Control Panel
Language	English