Ness D8X User Manual

33
Programming Radio Keys
In User Program Mode.
Refer to the User Code options table on page
31 then enter the option number of the user
code you want to program.
Touch
+ +
3 digit option number
Example, P203E
Each of the User Codes, except
for the Master Code, can be
programmed to be Radio Codes.
This allows up to 55 Ness Radio
Keys to be used for arming and
disarming of the panel.
The optional Ness Radio Interface
is required for radio operation. Ask
your installer.
Indicates that this code has been
enabled as a Radio Code.
If the option has been enabled by
your installer.
Touch
The display will show
Press the disarm button on
your Ness Radio Key
(or the No. 1 button).
The green status bar will
indicate that the Radio Key was
successfully programmed.
If you hear a long beep, the Radio
key may already be programmed
at another user code.
Touch to delete a Radio Key.

Ness D8X Specifications

General

Brand	Ness
Model	D8X
Category	Control Panel
Language	English