Ness D8X User Manual

34
Programming Timers
This option allows you to program:
ENTRY DELAY TIME 1 (01-99 sec)
Entry Delay Time 1 sets the time
allowed to enter the premises
through a delay zone.
ENTRY DELAY TIME 2 (01-990 sec)
If enabled by your installer, this
timer is used to give extra long
entry delay on selected zones.
Entry Delay Time 2 is internally
multiplied by 10. For example,
enter 12 to get a time of 120
seconds.
EXIT DELAY TIME (01-99 sec)
Exit Delay Time sets the time
allowed to exit the premises after
arming. All zones, except 24hr
zones, are inactive during the Exit
Delay Time.
In User Program Mode.
Touch
To program.
Touch
+ +
Touch + +
Touch + +
EXAMPLE: To set Entry Delay Time 1.
Touch
Enter the new delay (01-99) +
01-99
01-99
01-99
The option number
and the current delay time is
displayed.
The new delay time is displayed.

Ness D8X Specifications

General

Brand	Ness
Model	D8X
Category	Control Panel
Language	English