Net.Do FOX512 - Other Setting; Data Initialized

Net.DO Lighting Control Equipment Co.,Ltd http://www.netdo.com.cn
FOX512 Moving Light Controller. PAGE: 16
5.5 Other Setting
The Other… menu tree is shown on the right:
5.5.1 Data Initialized
Path: SETUP  Other…  Initial…
In Initial… menu, there are 4 soft keys as follows:
 CLR PB soft key --- Press and hold for 2 seconds to clear all programs in the console.
 CLR Scene soft key --- Press and hold for 2 seconds to clear all scenes in the console.
 CLR Patch soft key --- Press and hold for 2 seconds to clear all fixture patches in the console.
 Init All soft key --- Press and hold for 2 seconds to erase all data and restore factory settings.
Remark: Please notice to backup the useful data before data initialization.
Other…
Initial…
(F1)
CH Fader
(F2)