Net.Do FOX512 - Attribute ALIGN Function; Lamp on; Lamp off; Reset Function

Net.DO Lighting Control Equipment Co.,Ltd http://www.netdo.com.cn
FOX512 Moving Light Controller. PAGE: 20
6.10 Attribute ALIGN function
Copy the attribute of “Reference Fixture” to other fixtures to make their value same as ”Reference
Fixture”.
There are 2 ways of Attribute ALIGN (firstly select fixtures and “Reference Fixture”)
 Align all attribute: Press ALIGN key to align all attribute of selected fixtures to “Reference
Fixture”.
 Align certain attribute: Press and hold ALIGN key  Press Attribute Key Successively;
(Multiple attribute can be selected. For example: Dimmer  Gobo  …)
6.11 Lamp On / Lamp Off / Reset function
Certain fixtures require operation such as “Lamp On” to their bulbs before use. Operation:
Press LOCATE for 2 seconds to enter Fixture
Menu. In Fixture Menu, Lamp On/Lamp Off/Reset can be
operated. Press BACK key to exit.
 Lamp On:
In Fixture Menu, select fixtures, press Lamp On soft key.
 Lamp Off:
In Fixture Menu, press Lamp Off soft key.
 Reset:
In Fixture Menu, press Reset soft key.
Notice: The corresponding library must contain the MACRO information of Lamp On/Lamp Off/
Reset.
Library can be customized by <NetDO Library Software> in PC.