EasyManua.ls Logo

NET Corsight CO1041C2 - Housing; Lens Mount, Optical Head; Integrated Strobe Ring; Sensor

Default Icon
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23/50
Please note that all data and illustrations are subject to error, change and omissionswithout notice. CORSI GH T
Operational Manual - rev. 2.0_10_2016
Housing
CORSIG HT is offered with a IP67 housing (solid particle protection: dust tight, liquid i ngress protection:
immersion up to 1m).
Lens mount, optical head
All the models are equipped with a C-mount optical head (1inch thread diameter, 32 threads per inch,
17.526 mm flange back). CS-mount version (identical, only with 12.5 mm flange back) is available on
request for high volume OEM customers.
Integrated strobe ring
The C O R S I G H T camera can be optionally equipped with an integrated strobe ring that can be s o f t w a r e -
c o n t r o l l e d d i r e c t l y f r o m t h e c a m e r a ' s f e a t u r e i n t e r f a c e .
Contact NET to learn the available strobe ring types and their specifications.
Sensor
Sensor types
Progressive scanning
All NET cameras provide progressive scan video output. The camera outputs full frame data in sequential
order (no field interlacing).
CMOS: global vs. rolling shutter
Some of the cameras with large CMOS sensors are equipped with a rolling shutter. In contrary to the
global shutter, where all camera pixels are exposed at exactly the same time, with rolling shutter the
exposure of every single line is slightly time-shifted relative to the previous line. This re quires some
special considerations, especially when capturing moving objects. Flash illumination is desirable.

Table of Contents