NET Corsight CO1041C2 - Status LED

37/50
Please note that all data and illustrations are subject to error, change and omissionswithout notice. CORSI GH T
Operational Manual - rev. 2.0_10_2016
Status LED
The C O R S I G H T cameras are equipped with a set of status LED's. The positions of the LED's on c a m e r a ' s
side is shown on the figure b e l o w . The purpose of the individual LED's (starting from connector side) is:
- WLAN activity (blue)
- User LED (green, software programmable)
- Ethernet speed (green, still for 1GB, blinking for 100Mb Ethernet)
- Ethernet link (orange)
- Power (green)
- SATA activity (orange)