Net2Edge PB-TDM1-CONTRA - Configuration > CES > Link > Settings

Transition Networks Contra Converter Quick Setup Guide
Configuration > CES > Link > Settings
This page shows the Configuration for all Logical Links.
The displayed items are:
Link
The logical link number.
Name
The optional name the user can configure for the logical link.
Direction
This allows the Link to be configured for Receive only, Transmit only, or allow both directions.
The default is Disabled.
Remote Link
The Link number for the Remote Link.
FPP (Frames Per Packet)
The number of frames per packet on the link.
Remote IP 1
The IP address of the remote end of the link (can be IPv4 or IPv6). This may be a multicast
group address when the direction is transmit only.
Remote IP 2
Optional second Remote IP address (can be IPv4 or IPv6). Only allowed when the direction is
Receive only.
33604 Rev. A www.transition.com Page 12 of 72