Transition Networks Contra Converter Quick Setup Guide
Monitor > CES > Ports > State
This page shows the status of the TDM ports. It also allows any active TDM over IP calls on those
ports to be dropped.
The displayed items are:
Port
The TDM port number.
Status
The operating state of the port (e.g., CONTRA DCE or CONTRA DTE).
Rx
The received signal power level on the port.
Rx error
Shows any error condition associated with the TDM port.
Break calls
Button allowing calls to be broken on that TDM port.
Serial Port Pinouts (If Applicable)
C/DTR - Data Terminal Ready
I/DCD - Data Carrier Detect
RTS - Request To Send
CTS - Clear To Send
DSR - Data Set Ready
Buttons
Refresh: Click to refresh the page immediately.
Auto-refresh
: Check this box to refresh the page automatically every 3 seconds.
Break: Drops any active TDM over IP calls on the port.
33604 Rev. A www.transition.com Page 25 of 72
To Next Page
Loading...