Transition Networks Contra Converter Quick Setup Guide
Configuration > CES > Link > Automatic Jitter Adjust
This page displays the current CES auomatic jitter buffer adjustment configuration for logical links and
allows the configuration to be modified.
The parameters are described below.
Link
The logical link number.
Mode
The mode in which automatic jitter buffer adjustment is to be run. Choose one of:
• None - No automatic adjustment of the jitter buffer will be carried out for this logical
link.
• Always on - Automatic jitter buffer adjustment is carried out periodically for this
logical link while it is active.
• Schedule - Automatic jitter buffer adjustment is carried out while this link is active
when a schedule stop time is reached.
• Once only - Automatic jitter buffer adjustment is carried out once after this logical link
becomes active.
Adjust after
In 'Always on' and 'Once only' modes, how long to wait in minutes before doing any jitter
buffer adjustment once the logical link has become active.
Schedule / Day / Start
In 'Schedule' mode, the time of day to start doing periodic jitter buffer adjustment when the
logical link is active. The first field is hours, the second is minutes.
Schedule / Day / Stop
In 'Schedule' mode, the time of day to stop doing periodic jitter buffer adjustment when the
logical link is active. The first field is hours, the second is minutes.
33604 Rev. A www.transition.com Page 16 of 72
To Next Page
Loading...