EasyManua.ls Logo

Net2Edge PB-TDM1-CONTRA - Monitor > CES > Links > Detailed

Default Icon
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Transition Networks Contra Converter Quick Setup Guide
Monitor > CES > Links > Detailed
This page shows the status information for a logical link.
The displayed items are:
Status
Activity
Active indicates that the link is active. TDM over IP packets will be transmitted and accepted
(depending on the configuration). Idle indicates that the link is not active. This would normally
be because the remote address has not been resolved or because insufficient channels are
available on the TDM port.
Channels
The number of TDM channels that make up the link.
Remote IP
The IP address of the remote end of the link. This may be a multicast group address.
Remote MAC
The Ethernet MAC address of the remote end of the link, or if the remote IP address is on a
different subnet, the Ethernet MAC address of the IP gateway. "Unknown" displays if the
Ethernet MAC address has not been resolved.
Remote Port
The UDP port number in use for this link on the remote box. This is only relevant when the
TDM over IP protocol is configured as UDP/RTP.
Remote Link
The logical link number on the remote box which this logical link is communicating with.
33604 Rev. A www.transition.com Page 28 of 72