Transition Networks Contra Converter Quick Setup Guide
Monitor > CES > Ports > Loops
This page shows the status of loops on TDM ports and allows them to be switched on and off.
The displayed items are:
Port
The TDM port number.
Local loop
Button showing whether local loop for this port is on or off. Click the button to enable or
disable the local loop.
Remote loop
Button showing whether remote loop for this port is on or off. Click the button to enable or
disable the remote loop.
Buttons
Refresh: Click to refresh the page immediately.
Auto-refresh
: Check this box to refresh the page automatically. Automatic refresh occurs every 3
seconds.
Off: The loop is off. Clicking the button turns the loop on.
On: The loop is on. Clicking the button turns the loop off.
33604 Rev. A www.transition.com Page 26 of 72
To Next Page
Loading...