Transition Networks Contra Converter Quick Setup Guide
Command: Display CES Status Link
Syntax: ces status link [<link>]
Description: Show the status for the specified logical link or for all logical links, where:
<link>: Logical Link number (1 to 128, may be less on some products).
Example: Display the status for logical link 1 and for all logical links:
>ces status link 1
CES Logical Link 1 Statistics
=============================
Link Number: 1
Name: FirstLL
State: idle
Number of Channels: 0
Remote IP Address: 192.168.1.110
Remote Link Number: 2
>ces status link
CES CONFIGURED LOGICAL LINKS: STATISTICS
========================================
LL 1 idle chans 0 remote 192.168.1.110
>
Command: Display CES Status Call
Syntax: ces status call
Description: Shows the active calls status.
Example: Display CES active calls status:
>ces status call
CES Call Status
===============
There are no calls active
>
33604 Rev. A www.transition.com Page 61 of 72
To Next Page
Loading...