NMC-DC
INSTALLATION MANUAL
Page: of 109 pagesRevision: 01 IDoc. Name: NMC-DC I Installation Manual
Crop Management Technologies
“7. Dosing Configuration”
EC and PH Control and Alarms to “Yes”
Set Min. On Time to 0.8≤2.0 seconds
Set Min. Off Time to 0.8≤2.0 seconds
To set Control Cycle, run system and measure time
in seconds it takes to see reaction of EC/PH meter
Set dosing Booster Delay to 10 seconds
NOTE: For different dosing settings,
please refer to NMC-DC Advanced Settings
1 2 3
9.7 Dosing Configuration
49
To Next Page
Loading...
