NMC-DC
INSTALLATION MANUAL
Page: of 109 pagesRevision: 01 IDoc. Name: NMC-DC I Installation Manual
Crop Management Technologies
Troubleshooting
1. Power Fail
Switch is in the ON position.
Fuse x2
If controller still is not working
then turn switch OFF and:
If controller turns on and off:
Solar Panel ≈ 13.0 Volts
Main Battery ≈ 12.5 Volts
Main Battery Status = FULL
”5. Test”
”7. Power & Communication”
Battery
IF CONTROLLER STILL IS NOT WORKING THEN:
Option A – Replace Fuse
Option B – Replace Battery
FINAL SOLUTION
78
To Next Page
Loading...
