9. If you are replacing another disk drive, repeat Steps 3 through 8.
10. Verify the disk drive's activity (green) LED is illuminated.
When the disk drive's activity LED is solid green, it means the disk drive has power. When the
disk drive's activity LED is blinking, it means the disk drive has power and I/O is in progress.
11. If you disabled disk ownership automatic assignment in Step 1, manually assign disk ownership,
and then reenable disk ownership automatic assignment if needed:
a. Display all unowned disks:
storage disk show -container-type unassigned
b. Assign each disk:
storage disk assign -disk disk_name -owner owner_name
You can use the wildcard character to assign more than one disk at once.
c. Reenable disk ownership automatic assignment if needed:
storage disk option modify -node node_name -autoassign on
You need to reenable disk ownership automatic assignment on both controllers in an HA pair.
12. Return the failed part to NetApp, as described in the RMA instructions shipped with the kit.
Contact technical support at
NetApp Support
, 888-463-8277 (North America), 00-800-44-638277
(Europe), or +800-800-80-800 (Asia/Pacific) if you need the RMA number or additional help
with the replacement procedure.
Hot-swapping a disk drive in a DS224C or DS212C disk shelf | 7
To Next Page
Loading...
Need help?
General
