NetComm 4GM3W User Manual

14
NetComm Wireless 4GM3W User Guide
www.netcommwireless.com
Step 2
In this step, you are able to configure the 2.4GHz WiFi network. By default, the 2.4GHz wireless radio is on but you may turn it off
by setting the
Wireless 2.4GHz (WiFi) option to Off. If you intend to use the wireless function, set the SSID Broadcast option to
Enable if you want the wireless network to show up when devices perform a network scan when in range, or set it to Disable to
hide the network from scans. Finally, if you wish to customise the network name, enter it into the
SSID Broadcast Name field. The
network name may not exceed 32 characters.
Click the Next button to continue.

NetComm 4GM3W Specifications

Operating Environment

operating temperature	0-40°C
operating humidity	10%-90% non-condensing
storage temperature	-10-70°C
storage humidity	0%-95% non-condensing

Power

dc input voltage	5V/2A

Ports & Interfaces

usb 2.0 port	1 x USB 2.0 port
switchable wan/lan port	1 x 10/100/1000 Mbps
wps button	1 x WPS button
reset button	1 x Reset button
3g-wan switch	1 x 3G-WAN switch

Wireless

dual band wi-fi	2.4GHz/5GHz
2.4ghz band	IEEE 802.11n
5ghz band	IEEE 802.11ac
concurrent wi-fi	2.4GHz & 5GHz

Weight and Dimensions

dimension	98mm (L) x 68mm (W) x 20.5mm (H)