NetComm NP508 User Manual

10
NP508 – 500Mbps Powerline Adapters User Guide
www.netcommwireless.com
6. Unplug Powerline adapter Z and then connect it to your Ethernet device using the Ethernet cables from the product
package. After connecting the Ethernet cable, plug adapter Z directly to a wall outlet where you intend to use it.
Note: Powerline adapters work best when connected directly to a wall socket. Avoid plugging them into a power strip or
power extension. Other electrical devices in the power strip produce electrical noise that may affect the performance of the
adapter.

NetComm NP508 Specifications

General

Brand	NetComm
Model	NP508
Category	Adapter
Language	English