Security Gateway Manual Netgate-8300
Fig. 3: An example of using PuTTY in Linux
If portions of the text are unreadable but appear to be properly formatted, the most likely culprit is a character encoding
mismatch in the terminal. Adding the -U parameter to the screen command line arguments forces it to use UTF-8 for
character encoding:
$ sudo screen -U <console-port> 115200
Terminal Settings
The settings to use within the terminal program are:
Speed
115200 baud, the speed of the BIOS
Data bits
8
Parity
None
Stop bits
1
Flow Control
Off or XON/OFF.
© Copyright 2024 Rubicon Communications LLC 34
To Next Page
Loading...
