Security Gateway Manual Netgate-8300
2.3.4 Update the Firmware
• Navigate to Configuration > Firmware Update in the web interface.
Fig. 10: Firmware Update menu location
• Check Reboot immediately after update.
Warning: This reboots the BMC and the operating system.
• Click Choose File
• Select the firmware update file (e.g. BMC_FW-Update.bin).
• Click Upload to start the upload process.
• Wait until the upload process is 100% complete.
• Click Update to start the BMC firmware update process.
• Wait for the update to complete and for the device to reboot.
• Log back into the BMC web interface.
• Verify the BMC version.
2.3.5 Factory Reset
To complete the update, the BMC must be factory reset.
Warning: This factory reset will remove any custom settings, including network configurations, additional users,
and password changes.
• Navigate to Diagnostics > Factory Reset.
• Click Restore to start the factory reset process.
© Copyright 2024 Rubicon Communications LLC 48
To Next Page
Loading...
