Security Gateway Manual Netgate-8300
Reject Other Firewall-bound Traffic
Add rule to reject any other traffic to the firewall to ensure users on this interface cannot connect to management services
such as the GUI, SSH, and so on.
• Click to add a new rule at the bottom of the list.
• Configure the rule as follows:
Action
Reject
Interface
OPTx (or the custom name)
Protocol
Any
Source
Any
Destination
This Firewall (self)
Description
Reject all other traffic to the firewall
• Click Save
Reject Private Traffic
Add rule to reject traffic from this network to all other private networks.
• Click to add a new rule at the bottom of the list.
• Configure the rule as follows:
Action
Reject
Interface
OPTx (or the custom name)
Protocol
Any
Source
Any
Destination
Address or Alias, PrivateNets (the alias created earlier)
Description
Reject all other traffic to private networks
• Click Save
© Copyright 2024 Rubicon Communications LLC 70