Get Started
7
Telstra Wi-Fi 4GX Advanced III
Note: You cannot charge the hotspot while it is boosting another device.
To start the jump boost of another device from the touch screen:
1. Plug the jump boost cable into your hotspot.
2. Plug the device that you want to charge into the other end of the jump boost cable.
On the Home screen, a pop-up window appears with boost options. If the pop-up window
does not display, tap Settings > Jump Boost.
3. Tap one of the boosting options (30, 60, or 90 minutes).
To start the jump boost of another device from the hotspot web page:
1. Plug the jump boost cable into your hotspot.
2. Plug the device that you want to charge into the other end of the jump boost cable.
3. On the home page, log in as an administrator.
4. Click the Jump Boost button.
5. Select one of the boosting options (30, 60, or 90 minutes).
Set Up and Connect to the Internet
To install the battery and micro SIM card in your hotspot, complete the steps in the sections
listed in steps 1 and 2.
To set up and connect to the Internet:
1. Install the Micro SIM card.
For more information, see Install the Micro SIM Card on page 8.
2. Install the battery.
For more information, see Install the Battery on page 9.
3. Connect to the Internet.
For more information, see Connect to the Internet on page 10.
4. Personalise the hotspot.
For more information, see Personalise the Hotspot on page 10.
To Next Page
Loading...
