Use Your Mobile Hotspot
17
Telstra Wi-Fi 4GX Advanced III
The hotspot web page displays the data usage for the current billing cycle and for the
current broadband session.
Manage Wi-Fi
Advanced users can set up the Wi-Fi radio of the hotspot to meet their Wi-Fi needs by
customizing settings on the hotspot web page.
On the hotspot web page, the following Wi-Fi profiles are available:
• Default, main W
i-Fi. Share your main Wi-Fi with 2.4 GHz devices you trust.
• 5GHz W
i-Fi. Share your main Wi-Fi with 5 GHz devices you trust.
• Guest W
i-Fi. Share your Wi-Fi with temporary visitors without exposing the 2.4 GHz
devices on your main Wi-Fi network or letting visitors access the hotspot web page.
• Dual-band W
i-Fi (2.4 GHz and 5 GHz) . Gives you the flexibility to connect 2.4 GHz and
5 GHz devices with your main Wi-Fi to transfer data at higher throughputs.
By default, main Wi-Fi is enabled and both dual-band Wi-Fi and guest Wi-Fi are disabled. If
your place of business does not allow Wi-Fi or for any other reason you want to disable Wi-Fi
and use the mobile hotspot only in tethered mode, the mobile hotspot gives you that option.
Note: Whenever you change Wi-Fi settings, any devices connected to the
hotspot are disconnected and might need to be reconnected.
To Next Page
Loading...
