Advanced Settings
80
Telstra Wi-Fi 4GX Advanced III
To enable VPN pass through:
1. From a computer or wireless device that is connected to your network, launch an
Internet browser.
2. Enter http://m.home or http://192.168.1.1.
A login page displays.
3. Enter the administrator login password.
The default password is admin.
The password is case-sensitive.
The Home page displays.
4. Select Settings > Router > Basic.
5. In the LAN section, select the On radio button next to VPN Passthrough.
The Submit button displays after you make a selection.
6. Click the Submit button.
Your settings are saved.
Configure APN Details
Your mobile hotspot comes preconfigured with the access point name (APN) for your
network service provider.
The hotspot checks the APN to determine the type of network connection to establish.
To Next Page
Loading...
