NETGEAR CG4500BDv2

Advanced Settings
29
NETGEAR DOCSIS 3.0 N900 Wireless Data Gateway
Advanced Wireless Settings (2.4 GHz and 5 GHz)
To configure the wireless radio settings, and other advanced settings, use the Advanced
Wireless Settings screen.
 To configure advanced wireless settings:
1. In the main menu, under Advanced, select one of the following options:
• Wireless Settings 2.4 GHz
• Wireless Settings 5 GHz
The Advanced Wireless Settings screen displays.
2. Configure the settings described in the following table.
The options are the same for both 2.4 GHz and 5 GHz networks.
Advanced Wireless Settings Description
Wireless Access
Point
Enable By default this check box is selected so that the
gateway works as a wireless access point. You can
turn off the wireless radio to disable access through
this device, which can be helpful for configuration,
network tuning, or troubleshooting activities.
Advanced
Configuration
• Fragmentation Threshold
• CTS/RTS Threshold
• Preamble Mode
The default settings for these fields usually work fine.
Change them only if you have a specific reason for
doing so.