Hardware Overview
8
AC1900, N900, and N450 WiFi Cable Data Gateways
Introduction
The cable data gateway provides you with an easy and secure way to set up a WiFi home
network with fast access to the Internet over a cable network. It lets you block unsafe Internet
content and applications and protects the devices (WiFi devices, computers, gaming
consoles, and so on) that you connect to your home network.
To set up your new cable data gateway, use the installation guide that comes in the package.
This chapter provides supplemental information that might help you with the setup.
For information about positioning your cable data gateway, see Position Your WiFi Cable
Data Gateway on page 20.
Hardware Features of the AC1900 WiFi Cable Data
Gateway
This section describes the physical aspects of the AC1900 WiFi Cable Data Gateway, Model
C6300BD. This model supports 802.11ac, provides radios for both the 2.4 GHz and 5 Ghz
band, and can support WiFi throughput of up to 1900 Mbps.
Front Panel of the AC1900 WiFi Cable Data Gateway
The front panel contains control buttons and status LEDs. Use the LEDs to verify status and
connections.
Note: For optimal performance, keep the cable data gateway vertical in the
stand and do not detach the stand. Do not mount this unit to a wall; it
is not suitable for wall mounting.
To Next Page
Loading...
Need help?
General