Manage Internet, WAN, and LAN Settings and Use the WPS Wizard
52
AC1900, N900, and N450 WiFi Cable Data Gateways
Remove an IP Address Reservation
You can remove an IP address reservation that you no longer need.
To remove an IP address reservation:
1. On your computer, launch an Internet browser such as Mozilla Firefox or Microsoft
Internet Explorer.
2. In the address field of your browser, enter http://routerlogin.net.
You are prompted to enter a user name and password.
3. Type admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADVANCED > Setup > LAN Setup.
The LAN Setup screen displays.
6. In the Address Reservation Table, select the radio button next to the reserved address that
you want to remove.
7. Click the Delete button.
The reserved address is removed from the Address Reservation Table.
8. Click the Apply button.
Your settings are saved.
Use the WPS Wizard to Add a Device to the WiFi Network
WPS (Wi-Fi Protected Setup) lets you connect a computer or WiFi device to the cable data
gateway’s network without entering the WiFi network passphrase or key. Instead, you use a
WPS button or enter a PIN to connect.
If you use the push button method, the WiFi device that you are trying to connect must
provide either a physical button or a software button. If you use the PIN method, you must
know the PIN of the WiFi device that you are trying to connect.
WPS supports WPA and WPA2 WiFi security. If your cable data gateway network is open (no
WiFi security is set, which is not the default setting for the cable data gateway), connecting
with WPS automatically sets WPA + WPA2 WiFi security on the cable data gateway network
and generates a random passphrase. You can view this passphrase (see
View or Change
the Basic Settings for the Main WiFi Network on page 31).
To Next Page
Loading...
Need help?
General