NETGEAR CM500 User Manual

Manage and Monitor
16
CM500 High Speed Cable Modem
The Event Log screen shows the following information:
• Time. The time the event log entry was recorded.
The correct time displays only after the cable modem successfully connects to the
cable Internet provider’s network.
• Priority.
The severity for the event log entry.
• Description
. A description of the event log entry.
5. To refresh the log screen, click the Refresh button.
6. To clear the log entries, click the Clear Log button.
Change the admin Password
You can change the default password that is used to log in to the cable modem with the user
name admin.
 To change the password for the user name admin:
1. Launch a web browser from a computer that is attached over an Ethernet cable to the
cable modem or from a computer that is connected to a WiFi router that is attached over an
Ethernet cable to the cable modem.
2. Type http://192.168.100.1.
A login screen displays.
3. Enter the cable modem user name and password.
The user name is admin
.
The default password is password.
The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Administration > Set Password
.

NETGEAR CM500 Specifications

General

Supported network protocols	IPv6
Flash memory	8 MB
Internal memory	128 MB
DC-in jack	Yes
Ethernet LAN (RJ-45) ports	1
Cables included	LAN (RJ-45)

Weight and Dimensions

Depth	60 mm
Width	185 mm
Height	124 mm
Weight	280 g