NETGEAR DOCSIS C6230 User Manual

Factory Settings
You can return the cable modem to its factory settings. Use the end of a paper clip or
a similar object to press and hold the Reset button on the back of the cable modem
for at least seven seconds. The cable modem resets, and returns to the factory
configuration settings shown in the following table.
Table 4. Factory default settings
Default behaviorFeature
www.routerlogin.net or 192.168.0.1User login URLCable
modem
router
login
adminUser name (case-sensitive)
The first time that you log in to the modem
router, you are prompted to set the admin
password
Login password (case-sensitive)
192.168.0.1LAN IPLocal
network
(LAN)
255.255.255.0Subnet mask
EnabledDHCP server
192.168.0.2 to 192.168.0.254DHCP range
DisabledDMZ
ISP/MSO ToD (time of day) configurationTime zone
EnabledSNMP
DisabledInbound (communications coming in
from the Internet)
Cable
modem
firewall
Enabled (all)Outbound (communications going out
to the Internet)
User Manual105Supplemental Information
C6230 WiFi Cable Modem Router

NETGEAR DOCSIS C6230 Specifications

General

DOCSIS Version	3.0
Channel Bonding	16x4
Downstream Channels	16
Upstream Channels	4
WiFi Standard	802.11ac
Ethernet Ports	2
WiFi Technology	Dual Band
Compatibility	Xfinity, Spectrum, Cox
USB Ports	1