3. Enter the cable modem router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > USB Storage > Advanced Settings.
The USB Storage (Advanced Settings) page displays.
5.
Scroll down to the Available Networks Folder section, and view or adjust the following
settings:
•
Share Name. If only one device is connected, the default share name is
USB_Storage. (Some cable modem router models include more than one USB
port.)
You can click the name, or you can type it in the address field of your web browser.
If Not Shared is shown, the default share was deleted, and no other share for the
root folder exists. Click the link to change this setting.
•
Read Access and Write Access. Show the permissions and access controls on
the network folder. All-no password (the default) allows all users to access the
network folder. The password for admin is the same one that you use to log in
to the cable modem router.
•
Folder Name. Full path of the network folder.
•
Volume Name. Volume name from the storage device (either USB storage device
or HDD).
•
Total Space and Free Space. Show the current utilization of the storage device.
Add a Network Folder on a USB Storage
Device
You can add network folders on the USB storage device.
To add a network folder:
1.
Launch a web browser from a computer or mobile device that is connected to the
cable modem router network.
2.
Enter http://routerlogin.net or http://192.168.0.1.
A login window opens.
3. Enter the cable modem router admin user name and password.
User Manual43Share USB Devices Attached to
the Cable Modem Router
C6230 WiFi Cable Modem Router
To Next Page
Loading...
Need help?
General
