5.
Select the Turn E-mail Notification On check box.
6.
In the Your Outgoing Mail Server field, enter the name of your ISP outgoing (SMTP)
mail server (such as mail.myISP.com).
You might be able to find this information in the configuration page of your email
program. If you leave this field blank, log and alert messages are not sent.
7.
In the Your Outgoing Mail Server field, enter the name of your Internet provider’s
outgoing (SMTP) mail server (such as mail.myISP.com).
You might be able to find this information in the configuration window of your email
program. If you leave this field blank, log and alert messages are not sent.
8.
In the Send to This E-mail Address field, enter the email address to which logs and
alerts are to be sent.
This email address is also used for the From address. If this field is blank, log and
alert messages are not sent.
9.
If your outgoing email server requires authentication, select the My Mail Server
requires authentication check box, and do the following:
a.
In the User Name field, type the user name for the outgoing email server.
b.
In the Password field, type the password for the outgoing email server.
10. To send alerts when someone attempts to visit a blocked site, select the Send Alerts
Immediately check box.
11.
To send logs based on a schedule, specify these settings:
•
From the Send logs according to this schedule menu, select the schedule type.
•
From the Day menu, select the day.
•
From the Time menu, select the time, and select the am or pm radio button.
12. Click the Apply button.
Your settings are saved.
Logs are sent automatically. If the log fills before the specified time, it is sent. After
the log is sent, it is cleared from the cable modem router memory. If the cable modem
router cannot email the log and the log buffer is full, the cable modem router
overwrites the log.
User Manual36Control Access to the Internet
C6230 WiFi Cable Modem Router
To Next Page
Loading...
Need help?
General
