192.168.0.2 and 192.168.0.254, although you can save part of the range for devices
with fixed addresses.
To specify the pool of IP addresses that the cable modem router assigns:
1.
Launch a web browser from a computer or mobile device that is connected to the
cable modem router network.
2.
Enter http://routerlogin.net or http://192.168.0.1.
A login window opens.
3. Enter the cable modem router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
5. Make sure that the Use Gateway as DHCP Server check box is selected.
6.
Specify the range of IP addresses that the cable modem router assigns:
a.
In the Starting IP Address field, type the lowest number in the range.
This IP address must be in the same subnet as the cable modem router.
b.
In the Ending IP Address field, type the number at the end of the range of IP
addresses.
This IP address must be in the same subnet as the cable modem router.
7. Click the Apply button.
Your settings are saved.
The cable modem router delivers the following parameters to any LAN device that
requests DHCP:
•
An IP address from the range that you defined
•
Subnet mask
•
Gateway IP address (the cable modem router’s LAN IP address)
•
DNS server IP address (the cable modem router’s LAN IP address)
User Manual58Specify Network Settings
C6230 WiFi Cable Modem Router
To Next Page
Loading...
Need help?
General
