NETGEAR EN104TP

Model EN104
TP
/EN106
TP
/EN108
TP
Ethernet Hub Installation Guide
General Specifications
Network Protocol and Standards Compatibility
IEEE 802.3i, 10BASE-T Ethernet
Data Rate
10 Mbps, Manchester encoded
Interface
4 10BASE-T ports (RJ-45) on the Model
EN104
TP
hub
6 10BASE-T ports (RJ-45) on the Model
EN106
TP
hub
8 10BASE-T ports (RJ-45) on the Model
EN108
TP
hub
Power
Power Consumption:
Model EN104
TP
hub 3.5 W
Model EN106
TP
hub
Model EN108
TP
hub
7.2 W
13.7 W
DC output voltage (Power adapter):
Model EN104
TP
hub 5V DC @ 800 mA max.
47 to 63 Hz
Model EN106
TP
hub and
Model EN108
TP
hub
12V DC @ 1200 mA max.
47 to 63 Hz
Physical Specifications
Dimensions:
Model EN104
TP
hub 3.37 by 4.0 by 1.1 in.
94 by 101 by 28 mm
Model EN106
TP
hub and
Model EN108
TP
hub 6.2 by 4.0 by 1.1 in.
158 by 101 by 28 mm
Weight:
Model EN104
TP
hub 0.74 lb (0.34 kg)
Model EN106
TP
hub and
Model EN108
TP
hub 1.17 lb (0.53 kg)
Environmental Specifications
Operating temperature: 0
°
to 40
°
C (32
°
to 104
°
F)
Operating humidity: 90% maximum relative humidity,
noncondensing
Electromagnetic Emissions
CE mark, commercial
FCC Part 15 Class A
EN 55 022 (CISPR 22), Class A
VCCI Class 1 ITE
Electromagnetic Susceptibility
CE mark, commercial
Electrostatic discharge (ESD): IEC 801-2, Level 2/3/4
Radiated electromagnetic field: IEC 801-3, Level 2
Electrical fast transient/burst: IEC 801-4, Level 2
Electrical surge: IEC 801-5, Level 2
Technical Specifications