NETGEAR GS408EPP Hardware Installation Guide

6.
Insert the mount’s locking tab and hook into the notches on the back or bottom of
the switch.
7. Slide the switch into the mount.
Attach the switch to a pole or table leg
The switch comes with straps and a mount. You can attach the straps to a pole or table
leg, attach the mount to the straps, and click-attach the back or bottom of the switch to
the mount.
To attach the switch to a pole or table leg:
1. Attach the straps to the mount by pulling the straps through the openings in the
mount.
2. Attach the straps with the attached mount to the pole or table leg.
Hardware Installation Guide22Installation
8-Port Easy Mount Gigabit Ethernet PoE+ Smart Managed Plus Switch GS408EPP

NETGEAR GS408EPP Specifications

General

Brand	NETGEAR
Model	GS408EPP
Category	Switch
Language	English