NETGEAR GS724TPv2 Hardware Installation Guide

5. Tighten the screws with a No. 2 Phillips screwdriver to secure the mounting brackets
to the rack.
Place the switch on a flat surface
The switch ships with four self-adhesive rubber footpads.
To install the switch on a flat surface:
Stick one rubber footpad on each of the four concave spaces on the bottom of the
switch.
The rubber footpads cushion the switch against shock and vibrations. They also
provide ventilation space between stacked switches.
Optional Step 5: Install an SFP transceiver
module
The following optional procedure describes how to install an optional SFP transceiver
module into one of the SFP ports of the switch.
Note: Contact your NETGEAR sales office to purchase these modules. If you do not
want to install an SFP module, skip this procedure.
Hardware Installation Guide28Installation
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports

NETGEAR GS724TPv2 Specifications

General

Brand	NETGEAR
Model	GS724TPv2
Category	Switch
Language	English