NETGEAR GS724TPv2 Hardware Installation Guide

Features
The switch supports the following key hardware features:
•
24 PoE+ Gigabit Ethernet ports.
•
2 dedicated SFP fiber ports.
•
PoE support:
- 24 PoE+ (802.3at) ports
-
Total PoE power budget of 190W for model GS724TPv2 and 380W for model
GS724TPP
•
MAC table size of 8K.
•
Variable speed fan that can lower the noise level during low temperatures.
•
Acoustic noise is equal to or less than 33 dBA (at 25°C) for model GS724TPv2 and
36.1 dBA (at 25°C) for model GS724TPP
•
52 Gbps full-duplex, nonblocking switch fabric.
•
Includes 19-inch rack-mount kit for rack installation.
•
Full compatibility with IEEE standards:
- IEEE 802.3 Ethernet
- IEEE 802.3u 100BASE-T
- IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LX
- IEEE 802.3ab 1000BASE-T
- IEEE 802.3i 10BASE-T
- IEEE 802.1Q VLAN tagging
-
IEEE 802.3x Full-duplex flow control
- IEEE 802.3ad Link aggregation (LAG with LACP)
- IEEE 802.1ab LLDP
-
IEEE 802.1p Class of Service (QoS)
- IEEE 802.1D Spanning Tree Protocol (STP)
- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.1x RADIUS network access control
-
IEEE 802.3az Energy Efficient Ethernet (EEE)
Hardware Installation Guide8Introduction
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports

NETGEAR GS724TPv2 Specifications

General

Brand	NETGEAR
Model	GS724TPv2
Category	Switch
Language	English