genie Advanced Home
33
N150 4-Port Wireless Router JNR1010
WPS Wizard
The WPS Wizard helps you add a WPS-capable client device (a wireless device or
computer) to your network. On the client device, either press its WPS button or locate its
WPS PIN.
To use the WPS Wizard:
1. Select Advanced > WPS W
izard.
2. Click Next.
The following screen lets you select the method for adding the WPS client (a wireless
device or computer).
3. Select either Push Button or PIN Number, as follows:
• T
o use the push button method, either click the WPS button on this screen, or press
the WPS button on the side of the router. Within 2 minutes, go to the wireless client
and press its WPS button to join the network without entering a password.
• T
o use the PIN method, select the PIN Number radio button, enter the client security
PIN, and click Next.
Within 2 minutes, go to the client device and use its WPS software to join the network
without entering a password.
The router attempts to add the WPS-capable device. The WPS LED on the front of
the router blinks green. When the router establishes a WPS connection, the LED is solid
green, and the router WPS screen displays a confirmation message.
4. (Optional) Repeat Step 2 and Step 3 to add another WPS client to your network.
To Next Page
Loading...
Need help?
General
