Administration
59
N150 4-Port Wireless Router JNR1010
Manage the Configuration File
The configuration settings of the N150 4-Port Wireless Router are stored within the router in
a configuration file. You can back up (save) this file to your computer, restore it, or reset it to
the factory default settings.
Back Up Settings
To back up the router’s configuration settings:
1. Select Advanced >
Administration > Backup Settings to display the following screen:
2. Click Back Up to save a copy of the current settings.
3. Choose a location to store the .cfg file that is on a computer on your network.
Restore Configuration Settings
To restore configuration settings that you backed up:
1. Enter the full path to the file on your network, or click the Browse button to find the file.
2. After you locate the .cfg file, click the Restore button to upload the file to the router.
Upon completion, the router reboots.
WARNING!
Do not interrupt the reboot process.
To Next Page
Loading...
Need help?
General
