Administration
57
N150 4-Port Wireless Router JNR1010
Wireless AP
The Wireless AP section displays the following information:
• W
ireless Network Name (SSID). The wireless network name (SSID) used by the router.
• Region.
The geographic region where the router is being used. It might be illegal to use
the wireless features of the router in some parts of the world.
• W
ireless Channel. Identifies the operating channel of the wireless port being used. The
default channel is Auto. When Auto is selected, the router finds the best operating
channel available. If you notice interference from nearby devices, you can select a
different channel. Channels 1, 6, and 11 do not interfere with each other.
• Mode. Indicates the wireless communication mode: Up to 54 Mbps, Up to 65 Mbps
(default), and Up to 150 Mbps.
• W
ireless Radio. Indicates whether the radio feature of the router is enabled. If this
feature is not enabled, the Wireless LED on the front panel is off.
• Broadcast Name. Indicates whether the router is broadcasting its SSID.
• W
ireless Isolation. Select this check box only if you want to prevent wireless
connections to the router.
• W
i-Fi Protected Setup. Indicates whether Wi-Fi Protected Setup is configured for this
network.
To Next Page
Loading...
Need help?
General
