genie BASIC Settings
34
JWNR2010v5 N300 Wireless Router
- For 128-bit WEP, enter 26 hexadecimal digits (any combination of 0–9, A–F).
The key values are not case-sensitive.
8. Click the Apply button.
Your changes are saved.
Attached Devices
This screen displays all of the computers and devices that are currently connected to your
wired and wireless networks.
Both authorized and unauthorized users (intruders) display. Wired devices are connected to
the router through Ethernet cables. Wireless devices have joined the wireless network.
To view the devices that are connected to your networks:
1. Log in to the router.
For more information, see Log In to Your Router After Installation on page 18.
2. Select BASIC > Attached Devices.
A screen similar to the following displays:
The Wired Devices and Wireless Devices tables show the following information:
• # (number).
The order in which the device joined the network.
• IP Address.
The IP address that the router assigned to this device when it joined the
network. This number can change when a device is disconnected and rejoins the
network.
• MAC Address.
The unique MAC address for each device does not change. The MAC
address is typically shown on the product label.
• Device Name. If the device name is known, it is shown here.
To Next Page
Loading...
