NETGEAR JWNR2010v5 N300 - Enable or Disable Wireless Router Radio

Advanced Settings
58
JWNR2010v5 N300 Wireless Router
Your changes are saved.
Enable or Disable Wireless Router Radio
 To enable or disable the wireless router radio:
1. Log in to the router.
For more information, see Log In to Your Router After Installation on page 18.
2. Select ADV
ANCED > Advanced Setup > Advanced Wireless Settings.
The following screen displays:
3. Do one of the following:
• T
o turn on the wireless radio, select the Enable Wireless Router Radio check box.
• T
o completely turn off the wireless radio of the router, clear the Enable Wireless
Router Radio check box.
When the wireless radio is disabled, you can still use the router by connecting
computers to the router with an Ethernet cable. By default, the wireless radio is
enabled.
4. Click the Apply button.
Your changes are saved.