genie ADVANCED Home
42
JWNR2010v5 N300 Wireless Router
b. Enter the client security PIN.
c. Click the Next button.
Within two minutes, go to the client and use its WPS software to let the client join
the network.
Y
ou do not need to enter a password.
While the router attempts to add the WPS-capable client, the WPS LED on the
front of the router blinks green. When the router establishes a WPS connection,
the LED is solid green, and the router WPS screen displays a confirmation
message.
d. T
o add another WPS client to your network, repeat this procedure.
WAN Setup
You can configure the Internet (WAN) port.
To change the WAN settings:
1. Log in to the router.
For more information, see Log In to Your Router After Installation on page 18.
2. Select ADV
ANCED > Setup > WAN Setup.
The following screen displays:
3. Enter the settings that you want to customize.
To Next Page
Loading...
