To enable or disable Screen Lock:
1. Quickly press and release the Power button to wake your mobile hotspot.
The lock screen displays.
2. Swipe up to unlock your mobile hotspot.
The home screen displays.
3. Tap Settings > Security > Screen Lock.
The Screen Lock page displays.
4. Tap OFF.
Your mobile hotspot prompts you to enter and confirm a four-digit passcode.
5. Using the on-screen keypad, enter and confirm a four-digit passcode of your choice,
then tap Ok.
Screen Lock is enabled.
6. To change your Screen Lock passcode after enabling it, tap the Pencil icon from the
Screen Lock page.
Your mobile hotspot prompts you to enter the current four-digit passcode, then
enter and confirm a new passcode.
Your Screen Lock passcode is changed.
7. To disable Screen Lock after enabling it, tap ON from the Screen Lock page.
Your mobile hotspot prompts you to enter the current four-digit passcode.
Screen Lock is disabled.
Configure access point names
(APNs)
Your mobile hotspot comes preconfigured with the access point name (APN) for most
cellular network service providers. You can add additional APNs and select among the
configured APN for use by the mobile hotspot. The mobile hotspot checks the APN to
determine the type of network connection to establish.
Select an APN
To select an APN:
1. Quickly press and release the Power button to wake your mobile hotspot.
User Manual40Adjust network, security, and
performance settings
Nighthawk M7 Ultra
To Next Page
Loading...
