Change the web user interface
login password
Your mobile hotspot is set up to use a default web user interface login password. The
default password is printed on a label in the battery compartment. You can optionally
change the default password to your own password.
To change the web user interface login password:
1. From the web user interface dashboard, select Settings > Administration > Set
Password.
The password settings are displayed.
2. In the New Password field, enter the password that you want to use.
The maximum password length is 31 characters.
3. Click or tap Apply.
Your settings are saved.
Factory reset your mobile hotspot
from the web user interface
To factory reset your mobile hotspot from the web user interface:
1. From the web user interface dashboard, select Settings > Administration > Factory
Reset.
The Factory Reset page displays.
2. Click or tap Factory Reset.
3. Click or tap Yes to confirm.
Your mobile hotspot resets and returns to its factory settings.
User Manual63Access the web user interface
Nighthawk M7 Ultra
To Next Page
Loading...
