Getting Started
16
N150 WiFi Router (N150R)
EZ Setup Wizard
You can log in to the router and use EZ Setup to set up your Internet connection.
To use the setup wizard:
1. Fro
m the top of the router menu, select EZ Setup to display the following screen:
2. Select either Yes or No, I want to configure the Router myself. If you select No, proceed
to Internet Setup (Basic Settings) on p
age 20.
3. If you selected Y
es, click Next.
With automatic Internet detection, the EZ Setup Wizard searches your Internet
connection
for servers and protocols to determine your ISP configuration.
Note: The EZ Setup Wizard cannot detect a Point-to-Point Tunneling
Protocol (PPTP) connection. If your ISP uses PPTP, you have to set
your Internet connection through the screen described in
Internet
Setup (Basic Settings) on page 20.
To troubleshoot an unsuccessful Internet connection:
1. Review you
r settings to be sure that you have selected the correct options and typed
everything correctly.
2. Co
ntact your ISP to verify that you have the correct configuration information.
3. Re
ad Chapter 7, Troubleshooting. If problems persist, register your product and contact
Technical Support.
4. If you cannot
connect to the router, check the Internet Protocol (TCP/IP) properties in the
Network Connections section of your PC Control Panel. They should be set to obtain both
IP and DNS server addresses automatically. See your computer documentation.
To Next Page
Loading...
Need help?
General
